optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 323-2396 visibleled@optekinc.com www.optekinc.com issue c 03/2011 page 1 of 7 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. plcc4 surface mount led ovsa1xbc2r8 series ? high intensity with low power consumption ? plcc4 packaged in 8 mm tape on 7? diameter reel ? compatible with automatic placement equipment ? dimensions: 3.5 x 2.8 x 1.95 mm ? 120 viewing angle the ovsa1xbc2r8 series is designed for wide angle, uniform light output. its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for bac klighting applications and for coupling with light guides. applications ? traffic lights ? signal and symbol luminaire ? mono-color indicators ? backlighting (lcd, switches, di splays, illuminated advertising) ? interior automotive lighting (instrumentation clusters) ? safety marker lights (steps, exit ways) product photo here part number material emitted color intensity typ. mcd lens color ovsa1abc2r8 alingap amber 1500 water clear OVSA1BBC2R8 ingan blue 550 water clear ovsa1gbc2r8 ingan green 1800 water clear ovsa1sbc2r8 allngap red 1600 water clear do not look directly at led with unshielded eyes or damage to retina may occur. rohs moisture 5a dimensions are in inches and [ mm ]
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 323-2396 visiblevled@optekinc.com www.optekinc.com issue c 03/2011 page 2 of 7 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. plcc4 surface mount led ovsa1xbc2r8 series electrical characteristics (t a = 25 o c unless otherwise noted) symbol parameter color min typ max units conditions i v luminous intensity blue 355 550 ---- mcd i f = 30 ma green 1400 1800 ---- red 1120 1600 ---- i f = 50 ma amber 1120 1500 ---- v f forward voltage blue ---- 3.6 4.2 v i f = 30 ma green ---- 3.6 4.2 red ---- 2.4 3.0 i f = 50 ma amber ---- 2.4 3.0 i r reverse current blue ---- ---- 10 a v r = 5 v green ---- ---- 10 red ---- ---- 10 amber ---- ---- 10 d dominant wavelength blue 460 470 480 i f = 30 ma green 515 527 535 red 618 624 630 i f = 50 ma amber 584 591 599 2 ?h-h 50% power angle blue & green 120 deg i f = 30 ma red & amber i f = 50 ma nm absolute maximum ratings (t a = 25 o c unless otherwise noted) storage temperature range -40 ~ +100 c operating temperature range -40 ~ +100 c reverse voltage 5 v continuous forward current blue, green 30 ma red, amber 70 ma peak forward current (pulse width 10 msec, duty cycle 10%) blue, green 100 ma red, amber 200 ma power dissipation blue, green 130 mw red, amber 210 mw thermal resistance junction to solder 1. blue, green 200 c/w red, amber 150 c/w electrostatic discharge classification (mil-std-883e) blue, green red, amber led junction temperature 110 c lead soldering temperature 250 c / 10 seconds class 2 moisture sensitivity level (ipc/jedec j-std-020c) 5a / 24 hrs note: 1. rth test condition: mounted on pc board fr 4 (pad size 16 mm 2 )
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 323-2396 visibleled@optekinc.com www.optekinc.com issue c 03/2011 page 3 of 7 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. plcc4 surface mount led ovsa1xbc2r8 series green: ovsa1gbc2r8 iv code min (mcd) max (mcd) wb 1400 1800 xa 1800 2240 xb 2240 2800 ya 2800 3550 blue: OVSA1BBC2R8 iv code min (mcd) max (mcd) tb 355 450 ua 450 560 ub 560 710 va 710 900 luminous intensity (i v ) @ 30ma blue: OVSA1BBC2R8 nm code min max b3 460 465 b4 465 470 b5 470 475 b6 475 480 dominant wavelength (nm) green: ovsa1gbc2r8 nm code min max g6 515 520 g7 520 525 g8 525 530 g9 530 535 standard bins leds are sorted to luminous intensity (i v ) and dominant wavelength (nm) bins listed below. each reel consists of a single intensity bin and a single color bin. orders are f illed using all intensity and color bins listed in the follow- ing tables. optek will not acc ept orders for single intensit y bins or single color bins. red: ovsa1sbc2r8 iv code min (mcd) max (mcd) wa 1120 1400 wb 1400 1800 xa 1800 2240 xb 2240 2800 amber: ovsa1abc2r8 iv code min (mcd) max (mcd) wa 1120 1400 wb 1400 1800 xa 1800 2240 xb 2240 2800 luminous intensity (i v ) @ 50ma red: ovsa1sbc2r8 nm code min max ra 618 630 amber: ovsa1abc2r8 nm code min max a2 584 587 a3 587 590 a4 590 593 a5 593 596 a6 596 599 dominant wavelength (nm)
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 323-2396 visiblevled@optekinc.com www.optekinc.com issue c 03/2011 page 4 of 7 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. typical electro-optical characteri stics curves OVSA1BBC2R8 (blue) & ovsa1gbc2r8 (green) forward current vs. forward voltage relative luminous intensity vs. forward current relative luminous intensity vs. wavelength blue & green maximum forward dc current vs. ambient temperature angular distribution blue & green reverse current vs. reverse voltage plcc4 surface mount led ovsa1xbc2r8 series
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 323-2396 visibleled@optekinc.com www.optekinc.com issue c 03/2011 page 5 of 7 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. typical electro-optical characterist ics curves for ovsa1sbc2r8 (red) & ovsa1abc2r8 (amber) forward current vs. forward voltage relative luminous intensity vs. forward current relative luminous intensity vs. wavelength red & amber maximum forward dc current vs. ambient temperature angular distribution red & amber reverse current vs. reverse voltage plcc4 surface mount led ovsa1xbc2r8 series
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 323-2396 visiblevled@optekinc.com www.optekinc.com issue c 03/2011 page 6 of 7 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. plcc4 surface mount led ovsa1xbc2r8 series solder = lead-free average ramp-up rate = 4c / sec. max peak temperature = 250c max. preheat temperature: 150 - 220c preheat time: 120 sec. max. ramp-down rate = 6c / sec. max. duration above 217c is 60 sec. max time within 5c of actual peak tempera- ture = 10 sec. max reflow solder profile
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 323-2396 visibleled@optekinc.com www.optekinc.com issue c 03/2011 page 7 of 7 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. reel dimensions: 7-inch reel plcc4 surface mount led ovsa1xbc2r8 series carrier tape dimensions: loaded qu antity 2000 pieces per reel moisture resistant packaging:
|
